Elk River Machine Company
 
Pipe Plant Automation

Pipe Express Pipe Off-Bear

Kiln carts

Kiln Cart Indexing system

Pipe Tipping Equipment

Pallet In feed System

Header In feed System

Hydra-Roll Mesh Rollers

Cage Expander Systems

Pallet and Header Removal and Cleaning Systems

Pallet and Header Removal and Cleaning Systems,

After the pipe is tipped down the pallets and headers can be removed and cleaned from the pipe in three different ways.
  • Fully Automated Pallet Removal and Cleaning System

    • This system will automatically remove the pallet and header (if headers are used). After removing the pallet and header the rings will automatically be cleaned and oiled. The rings will automatically be placed into the storage rack.
  • Semi Manual Pallet Removal and Cleaning System
    •


    This lifting aided system will manually remove the pallet and header (if headers are used). The removing devices are hanging from a hoist and are manually controlled. This system has been designed to eliminate any lifting for the operator. After removing the pallet and header the rings they can be manually cleaned and oiled while still attached to the lifting device. The hoist can then be moved to the storage rack to drop off the rings so they can be pre staged for its next run.
  • Manual Pallet Removal and Cleaning System
    •
    This system will manually remove the pallet and header (if headers are used). After removing the pallet and header the rings can be manually cleaned and oiled. The rings will then be placed into the storage rack manually.

  contact us : site index : copyright ©2006 top
The stripping process is fully automatic both gates and pallet latches are operated by the crane controls.
The pallets magazine are loaded by a forklift and the hoist controls automatically brings the pallets into plant.
While the pallets are transferred to the pipe machine they go by the wire room and the cage are placed on the pallet. The pallet and cage are automatically placed on the turntable to be picked up by the crane.
Headers are placed into the jacket.
Standard sizes are 3 Ton (12"-24" Pipe), 5 Ton (12"-36"Pipe), 6 Ton (12"-48" Pipe, other sizes available upon request.